DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

Item		Detecting Condition	Possible Cause
DTC Strategy		Voltage monitoring	Poor connector connection Faulty output speed sensor circuit Faulty output speed sensor
Enable Condition	Case1	Auxiliary battery voltage is above 10V
	Case2	Auxiliary battery voltage is above 10V
	Case3	Auxiliary battery voltage is above 10V Vehicle speed higher than 20 km/h (12 MPH) Lever position in "D"
Threshold Value	Case1	Input speed sensor voltage is less than 0.25V
	Case2	Input speed sensor voltage is less than 2V
	Case3	Input speed is 0 RPM
Fail Safe		Limp home mode (4th gear hold, manual shift from 2nd to 4th gear is allowed)
Detecting Time	Case1	1s
	Case2	1s
	Case3	4s
MIL ON Condition		2 driving cycles