LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Tailgate Assembly (PHEV)) >> Tailgate Trim >> Repair Procedures >> Removal >> [Tailgate Upper Trim]

[Tailgate Upper Trim]

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • Take care not to scratch the body surface.
  1. Remove the tailgate upper trim (A) by using a flat-head screwdriver or remover.
    G14939917Courtesy of KIA MOTORS AMERICA, INC.
  2. Install in the reverse order of removal.

    Information 

    Replace any damaged clips (or pin-type retainers).