LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Tailgate Assembly (PHEV)) >> Tailgate Lift >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
  • When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
  • When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.

Information 

Take care to not let the tailgate fall on you as the lifts are removed. Have an assistant hold the tailgate open, or use a secure method to hold it open.

  1. Remove the tailgate lift (B) after removing the clips (A) by using a flat-head screwdriver
    G14939922Courtesy of KIA MOTORS AMERICA, INC.