Initial Mode
WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
- System initializing time
- PDW-F: IGN1 + initial D Gear + below 15 Km/h
- PDW-R: IGN1+ initial R Gear
- PDW recognizes LID and sets the sensor ID up during initialization.
- PDW activates each sensor and then executes the diagnosis after finishing initialization of IPM (IBU).
- PDW starting buzzer is normally worked, when sensor does not send an error message and after finishing error diagnosis.
- If any failure is received from the any sensors, PDW starting buzzer does not work but the failure alarm is operated for a moment.
If you have display option, warning sign is also displayed.
Information
Buzzer for sensor failure is operated once, but display is shown continuously until it is repaired.
- IBU memorizes the completed initializing status of sensor.