Description & Operation: Operation
WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
- General Function
- Auto-learn takes place only once per ignition cycle.
- On successful completion, 4 road wheel sensor ID's are stored into memory for monitoring.
- Until auto-learn completes, previously learned sensors are monitored for under inflation/leak warnings.
- General Conditions to Learn New Sensors :
- Receiver must determine that it is confident that sensor is not temporary :
- Uses vehicle speed.
- Uses confidence reduction of previously learned sensors.
- Typical time for continuous driving over 15.5 mph (25 kph) to learn a new sensor is up to 20 minutes.
- Receiver must determine that it is confident that sensor is not temporary :
- General Conditions to un-learn a sensor that is removed :
- It takes less than 20 minutes at 15.5 mph (20 - 30 kph).
- Confidence reduction is dependent on time which vehicle is driven at speed greater than or equal to 12.4 mph (20 - 30 kph).