Repair Procedures: Replacement

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When removing with a flat-head screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

Disconnect the negative (-) battery terminal.
(Refer to Engine Electrical System - "AUXILIARY BATTERY ")
Remove the vanity lamp (A) by using a flat-head screwdriver or remover.

Courtesy of KIA MOTORS AMERICA, INC.
Replace the vanity lamp bulb (A).

Courtesy of KIA MOTORS AMERICA, INC.