[Second Row Seat Cushion Cover]: [6-Seat]

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Put on gloves to prevent hand injuries.
Take care not to bend or scratch the trim and panels.

Remove the second row seat assembly.
(Refer to Rear Seat - "[SECOND SEAT ASSEMBLY] ")
Remove the second row seat recliner lever cap (A) by using a flat-head screwdriver or remover.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the second row seat recliner lever (A) by removing the mounting bolt.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the second row seat lever garnish (A).

Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the second row seat power switch connector (A).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the second row seat outer shield cover (A) by using a flat-head screw driver or remover.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the second row seat inner shield cover (A) by removing the mounting screw

Courtesy of KIA MOTORS AMERICA, INC.
Remove the second row seat cover hooks (A) by using a flat-head screwdriver or remover

Courtesy of KIA MOTORS AMERICA, INC.
Remove the second row seat cushion assembly (A) from the second row seat cushion frame.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the Velcro tape (A) and the hog ring clip (B) from inside the second row seat cushion cover.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the second row seat cushion cover (A) from the second row seat cushion pad.

Courtesy of KIA MOTORS AMERICA, INC.