[6/7 Seat]

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

Remove the third row seat assembly.
(Refer to Rear Seat - "[THIRD ROW SEAT ASSEMBLY] ")
Press the lock pin (A) and removing the third row seat headrest (B).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the third row seat child anchor cover (A) by using a flat-head screwdriver or remover.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the third row seat cover hooks (A) by using a flat-head screwdriver or remover.

Courtesy of KIA MOTORS AMERICA, INC.
Open the zipper (A) on the side of the third row seat back.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the third row seat strap cover (A) by using a flat-head screwdriver or remover.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the third row seat strap cover mounting clips.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the third row seat back board (A) by removing the mounting screws.

Courtesy of KIA MOTORS AMERICA, INC.
Put the third row seat seat-strap cover (A) in the direction of the arrow.

Courtesy of KIA MOTORS AMERICA, INC.
Put the third row seat seat-strap cover (A) in the direction of the arrow.

Courtesy of KIA MOTORS AMERICA, INC.
Press the lock pin (A) and removing the second row seat headrest guide (B).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the third row seat back assembly (A) by from the third row seat back frame.
Remove the Velcro tape (A) and the hog ring clip (B) from inside the third row seat back cover.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the third row seat back cover (A) from the third row seat back pad.

Courtesy of KIA MOTORS AMERICA, INC.