LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Hydraulic System (PHEV)) >> ATF Warmer >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
  2. Refill the engine coolant system radiator with coolant.

    (Refer to Engine Mechanical System - "COOLANT ")

  3. Refill the hybrid motor cooling system with coolant and then perform the air bleeding using the KDS.

    (Refer to Hybrid Motor System - "COOLANT ")

  4. Refill the automatic transaxle with fluid.

    (Refer to Hydraulic System - "FLUID ")

scientia non olet · About LEMON Manuals