DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Hardware monitoring	Factory mode (in-line mode) activation
Enable Condition	Factory mode (in-line mode) activation is enable state
Disable Condition	In-line mode disable Diagnosis Ignition "OFF" and then "ON" 20 times EPB operation 20 times (apply/release) Ignition "OFF" and then "ON" 20 times or EPB operation 40 times (apply/release each count)

Item

Detecting Condition

Possible Cause

DTC Strategy

Enable Condition

Disable Condition

Diagnosis
Ignition "OFF" and then "ON" 20 times
EPB operation 20 times (apply/release)
Ignition "OFF" and then "ON" 20 times or EPB operation 40 times (apply/release each count)