DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		Internal monitoring	Poor connector connection Faulty IEB module Faulty EPB
Enable Condition		Ignition "ON"
Threshold Value	ASIC Internal Faulty	Configuration error SPI error ASIC Power error ASIC Current error Charge Pump error Oscillator error NVM error
Threshold Value	MCU Internal Faulty	EEPROM error ROM/RAM error MCU Trap error Stack overflow error Cycle time over error ADC converter error PFM error MPU error 3.3V internal voltage error
Warning Lamp	Case 1	All warning lamp "ON"
Disable Condition		No DTC after ignition "OFF" and then "ON"