| DTC Strategy |
|
- Poor connector connection
- Faulty brake switch circuit
- Faulty brake switch
- Faulty IEB module
|
| Enable Condition |
|
| Threshold Value |
Case 1 |
- Brake switch is "ON" for 6 minutes under vehicle speed is over 231 km/h (12.5 mph), brake pedal value is less than 6 mm, change in brake pedal value is less than 2 mm, and brake pedal pressure is less than 0.5 bar condition (Short to power)
|
| Case 2 |
- Brake switch is "OFF" for 3s under brake pedal value is over 25 mm, change in brake pedal value is over 5 mm and brake pedal pressure is more than 5 bar condition (open or short to ground)
|
| Warning Lamp |
|
| Disable Condition |
- Ignition "OFF" and then "ON" and brake pressured and released for 1s
|