DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		Monitor brake PTS	Poor connector connection Open or short in circuit of brake PTS Faulty brake PTS Faulty IEB module
Enable Condition		Ignition "ON" Auxiliary battery normal voltage (6.5 to 19V)
Threshold Value	Case 1	If PDT voltage is out of the range (0.2 to 4.8V) below longer than 300 ms
Threshold Value	Case 2	If PDF voltage is out of the range (0.1 to 2.4V) below longer than 300 ms
Detecting Time		300 ms
Detecting Time	Case 1	RBS
Detecting Time	Case 2	IEB, RBS, CHECK BRAKE
Warning Lamp		If normal after Ignition "OFF" and back "ON"