DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		Voltage monitoring	Faulty circuit pressure sensor
Enable Condition		Ignition "ON" Auxiliary battery normal voltage (6.5 to 19V)
Threshold Value	Case 1	Not received SENT data
	Case 2	Received SENT data and calculated CRC do not match
	Case 3	Pressure sensor internal fault occur
	Case 4	Pressure sensor signal is outside the normal range continues
Detecting Time		300 ms
Warning Lamp		ABS, ESP, IEB, RBS, DBC, AVH, CHECK BRAKE
Disable Condition		Ignition "OFF" and then "ON"