LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Body Side Molding (PHEV) >> Front Wheel Guard >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING:
  • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
  • When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
  • When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
  1. Remove the front tire.
  2. Remove the front wheel guard (A) after removing the mounting screws by removing the clips.
    G14940019Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals