Circuit Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (RL_C_RDR ↔ Chassis ground) |
|
RL_C_RDR connector | 1, 10 (power) | Chassis ground | - | B+ |
| Power inspection (RR_C_RDR ↔ Chassis ground) |
|
RR_C_RDR connector | 1, 10 (power) | Chassis ground | - | B+ |
| Open in circuit inspection (RL_C_RDR ↔ Chassis ground) |
|
RL_C_RDR connector | 4 (ground) | Chassis ground | - | Approx. below 1Ω |
| Open in circuit inspection (RR_C_RDR ↔ Chassis ground) |
|
RR_C_RDR connector | 4 (ground) | Chassis ground | - | Approx. below 1Ω |
Good
- Go to "SYSTEM INSPECTION " procedure.
No Good
- Carefully re-do troubleshooting steps.
- If problem still occurs, replace RL_C_RDR or RR_C_RDR and then go to "VERIFICATION OF REPAIR " procedure.