| DTC Strategy |
|
- Poor connector connection
- Faulty motor
- Faulty EPB driver system
- Short in motor circuit
- Abnormal electronic component
|
| Enable Condition |
- Normal battery voltage (9 to 16V)
|
| Threshold Value |
- When motor test (ASIC) during EPB motor not act, motor (+), (-) voltages are over 5V, more than 500ms
|
| Detecting Time |
- In control: -
- Non-control: 500ms
|
| Warning Lamp |
|
| Disable Condition |
- After ignition off/on, When motor test (ASIC regulator supply the power), motor (+), (-) voltages are in normal range (3 to 5V)
|