DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		CAN message monitoring	Faulty ICU Communication fault of ICU Open CAN line
Enable Condition		Normal battery voltage (9 to 16V) Ignition "ON"
Threshold Value		Not received ICU message
Detecting Time		200m
Warning Lamp		AVH, EPB
Disable Condition	ESP	After ignition off/on, when ICU CAN message is normally received consecutive 3 times
Disable Condition	EPB	When ICU CAN message is normally received, fault is normal recovery in the same ignition cycle