| DTC Strategy |
|
- Abnormal PCB
- Abnormal EPB motor wire
- Mechanically stuck in EPB
- Faulty connection of EPB motor
- Abnormal electronic component
|
| Enable Condition |
- Normal battery voltage (9 to 16V)
|
| Threshold Value |
Wiring |
- During EPB motor not act
- When detect the abnormal current by motor test (ASIC) more than 100ms
- During EPB motor act
- When detect the over current more than each reference time
- 50A (90ms), 40A (120ms), 30A (150ms)
|
| Motor |
- Monitors the applied voltage of the motor 100ms after requesting apply/release request of the PBC motor driver
- 50A(90ms), 40A(120ms), 30A(200ms)
|
| Warning Lamp |
|
| Disable Condition |
|