DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Variant coding monitoring	Variant coding (auto/optional) is not done Faulty IEBU VCU communication fault Replace the IEBU
Enable Condition	Normal battery voltage (9 to 16V) Ignition "ON"
Threshold Value	After IGN On, Optional Variant value for specific function is not coded - Optional Variant Coding should be done if there is error * Applicable for only vehicle which 64bit Optional Variant Coding is applied
Detecting time	5ms
Warning Lamp	EBD, ABS, ESC, RBS, DBC, AVH, EPB
Disable Condition	Variant coding is normal after ignition off/on