LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Telluride S, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Head Up Display (HUD) System >> Head Up Display (HUD) Unit >> Repair Procedures >> Removal

Repair Procedures: Removal

NOTE:
  • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Disconnect the negative battery terminal.
  2. Remove the cluster assembly.

    (Refer to Indicators And Gauges - "INSTRUMENT CLUSTER ")

  3. Remove the bracket (A) by loosening the nuts and screw.
    G13312101Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the head up display unit (A) by loosening the screws after disconnecting the connector (B).
G13312102Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals