Circuit Inspection

WARNING: This page is about a different variant/trim than selected.

G00612596

Courtesy of KIA MOTORS AMERICA, INC.

(+) Probe			(-) Probe		Reference
Inspection Condition	Connector	Terminal	Connector	Terminal	Reference
Disconnect the electrical connector(s) from the concerned component. Ignition "ON".	Ignition coil #4 connector	4 (power)	Chassis ground	-	B+
	Ignition coil #4 connector	2 (control)	Chassis ground	-	Approx. 0V
Ignition "OFF". Disconnect the electrical connector(s) from the concerned component.	Ignition coil #4 connector	4 (power)	PCB block	18 (power)	Approx. below 1Ω
	Ignition coil #4 connector	2 (control)	Chassis ground	-	∞ (infinity)Ω
	Ignition coil #4 connector	3 (feedback)	Chassis ground	-	∞ (infinity)Ω
	Ignition coil #4 connector	1 (ground)	Chassis ground	-	Approx. below 1Ω

Good

Go to "Component Inspection " procedure.

No Good

Repair or replace as necessary and then, go to "Verification of Repair " procedure.