LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Sorento SX, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Charging System - 2.5L (VIN C) (Except HEV)) >> Alternator >> Repair Procedures >> Reassembly

Repair Procedures: Reassembly

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of disassembly.
    NOTE:
    • Hold the brush (A) after pushing it in the arrow direction and inserting the pin (B).
      G13660932Courtesy of KIA MOTORS AMERICA, INC.
    • Hold the brush while pushing the cap (A) down in the arrow direction.
      G13660933Courtesy of KIA MOTORS AMERICA, INC.
    • Install the cap (A) by pushing in the arrow direction after installing the brush & regulator assembly.
      G13660934Courtesy of KIA MOTORS AMERICA, INC.
    • The OAD must be replaced with the OAD cap.
scientia non olet · About LEMON Manuals