LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Sorento SX, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Fuel Delivery System - 2.5L (VIN C) (Except HEV)) >> Filler-Neck Assembly >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the battery negative (-) terminal.
  2. Open the fuel filler door (A).
    G13661173Courtesy of KIA MOTORS AMERICA, INC.
  3. Open the fuel filler cap (A) by turning it in the counterclockwise.
    G13661174Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the rear wheel guard [LH].

    (Refer to Body - "REAR WHEEL GUARD ")

  5. Disconnect the fuel filler hose (A) by removing the clamp.
    G13661175Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconnect the leveling quick-connector (A).
    G13661176Courtesy of KIA MOTORS AMERICA, INC.
  7. Disconnect the leveling quick-connector (A).
    G13661177Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the filler-neck assembly (A) after removing the mounting nuts.

    Tightening torque: 

    5.9 - 7.8 N.m (0.6 - 0.8 kgf.m, 4.3 - 5.8 lb.ft, 52.0 - 69.4 lb.in)

    G13661178Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals