LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Mechanical >> Accessory Drive Belts >> Drive Belt System - 2.5T (VIN F) (Except HEV) >> Drive Belt >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install the water pump belt.
    1. Insert the SST (09252 - C1000) between the water pump pulley and the water pump belt.
    2. Install the water pump belt (A) by turning the damper pulley clockwise.
      G13664291Courtesy of KIA MOTORS AMERICA, INC.
      NOTE: Install the water pump belt while being careful not to damage the water pump belt caused by water pump pulley mounting bolt.
  2. For release the tension, turn the drive belt tensioner (A) clockwise then install the drive belt (B).
    Fig 1: Engine Drive Belt Routing Diagram
    G13664292Courtesy of KIA MOTORS AMERICA, INC.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals