| DTC Strategy |
|
- Abnormal PCB
- Abnormal EPB motor wire
- Mechanically stuck in EPB
- Faulty connection of EPB motor
|
| Enable Condition |
- Normal battery voltage (9 to 16.V)
|
| Threshold Value |
Wiring |
- During EPB motor not act
- When detect the abnormal current by motor test (ASIC) more than 100 ms
- During EPB motor act
- When detect the over current more than each reference time
- 50A (90 ms), 40A (120 ms), 30A (150 ms)
|
| Motor |
- Monitors the applied voltage of the motor 100 ms after requesting apply/release request of the PBC motor driver
- 50A (90 ms), 40A (120 ms), 30A (200 ms)
|
| Warning Lamp |
|
| Disable Condition |
|