LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Sorento S, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Body Side Molding (Except HEV) >> Rear Mud Guard >> Repair Procedures >> Replacement

Repair Procedures: Replacement

NOTE:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • Put on gloves to prevent hand injuries.
  • Take care not to bend or scratch the trim and panels.
  1. Remove the rear mud guard (A) by removing the mounting screws.
    G13662558Courtesy of KIA MOTORS AMERICA, INC.
  2. Install in the reverse order of removal.

    Information 

    Replace any damaged clips.

scientia non olet · About LEMON Manuals