DTC Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Poor connector contact
- Faulty lubrication oil temperature sensor
|
| Enable Condition |
- Ignition switch voltage above 10 V
- Engine revs above 500 RPM
- Before ignition "OFF", engine cooling water temperature above 90°C
- Lubrication temperature above 90°C
- Before ignition "OFF", engine coolant temperature differs from current coolant temperature above 34°C
|
| Threshold Value |
- Before the ignition "OFF", the difference between the lubrication oil temperature and the captured lubrication oil temperature is below 1°C
|
| Diagnosis Time |
|
| MIL |
|