LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Sorento LX, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Front Bumper And Radiator Grille (Except HEV) >> Radiator Grille >> Repair Procedures >> Replacement

Repair Procedures: Replacement

NOTE:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • Put on gloves to prevent hand injuries.
  • Take care not to bend or scratch the trim and panels.
  1. Remove the front bumper assembly.

    (Refer to Front Bumper - "FRONT BUMPER ASSEMBLY ")

  2. Remove the front bumper upper cover (A) by removing the mounting screws.
    NOTE: Be careful not to break it when removing it.
    G13662803Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the front bumper radiator grille (A) by removing the mounting screws.
    NOTE: Be careful not to break it when removing it.
    G13662804Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.

    Information 

    Replace any damaged clips (or pin-type retainers).

scientia non olet · About LEMON Manuals