Circuit Inspection
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
DBC switch connector | 1 (ON/START Input) | Chassis ground | - | B+ |
|
DBC switch connector | 24 (signal) | Chassis ground | - | 0V |
|
DBC switch connector | 24 (signal) | Chassis ground | - | B+ |
|
DBC switch connector | 24 (signal) | HECU (W/O EPB) connector | 16 (signal) | Approx. below 1Ω |
| HECU (With EPB) connector | 15 (signal) | Approx. below 1Ω | |||
| DBC switch connector | 1 (ON/START Input) | Chassis ground | - | ∞ (infinity)Ω | |
Good
- Go to "COMPONENT INSPECTION " procedure.
No Good
- Repair open or short in circuit and then go to "VERIFICATION OF REPAIR " procedure.