DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		Monitor CAN message	Faulty CLU Communication fault of CLU Open CAN line
Enable Condition		Normal battery voltage (9 to 16V) Ignition "ON"
Threshold Value	Case1	Not received CLU message
Threshold Value	Case2	Not received CLU message in terrain mode option
Detecting time	Case1	In control: 2000 ms Non-control: 3000 ms
Detecting time	Case2	In control: 2000 ms Non-control: 3000 ms
Warning Lamp		None
Disable Condition		When CLU CAN message is normally received, fault is normal recovery in the same ignition cycle