| DTC Strategy |
|
- Faulty TCM
- Faulty SCC
- Communication fault of TCM
- Open CAN line
|
| Enable Condition |
- Normal battery voltage (9 to 16V)
- Ignition "ON"
|
| Threshold Value |
Case1 |
- Received an abnormal TCU message (gear select)
|
| Case2 |
- Received an abnormal TCU message in SCC (torque converter speed)
|
| Detecting time |
- In control: 500 ms
- Non-control: 1500 ms
|
| Warning Lamp |
Case1 |
|
| Case2 |
|
| Disable Condition |
Case1 |
- When TCU message is normally received during consecutive 500 ms in the same ignition cycle
|
| Case2 |
- After ignition off/on, when TCU message is normally received consecutive 3 times
|