DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		Monitor CAN message	Faulty TCM
Enable Condition		Normal battery voltage (9 to 16V) Ignition "ON"
Threshold Value		Abnormal growth of alivecounter value of TCU message
Detecting time		In control: 500 ms Non-control: 1500 ms
Warning Lamp		ESP, DBC, AVH, EPB
Disable Condition	ESP	After ignition off/on, when TCU alivecount signal is normally received consecutive 3 times
Disable Condition	EPB	When TCU alivecount signal is normally received, fault is normal recovery in the same ignition cycle