| DTC Strategy |
- Check the brake switch circuit
|
- Poor connector connection
- Faulty BLS circuit
- Faulty BLS
|
| Enable Condition |
- Normal battery voltage (9 to 16V)
- Ignition "ON"
|
| Threshold Value |
Open |
- When BLS "OFF" and pressure sensor > 15bar for 3s or 1s continuously 3 times during non-control
|
| Short |
- In case of over 20kph speed and under 7 bar of pressure sensor input, monitoring a fault if BLS keeps on for 360s or 120s continuously 3 times
|
| Warning Lamp |
|
| Disable Condition |
- When BLS "OFF" and pressure sensor < 7bar, BLS "ON" and pressure sensor > 15bar more than 1s after ignition off/on
|