DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitor voltage	Poor connector connection Faulty BBVPS
Enable Condition	Normal battery voltage (9.5 to 16.5V) Ignition "ON"
Threshold Value	Monitoring a fault if output voltage over 4.85V or under 0.25V for 300ms
Detecting Time	In control/non-control: 300ms
Warning Lamp	EBD
Disable Condition	After ignition off and then on, (supply voltage is 4.75 to 5.25V) and (sensor output voltage is 0.25 to 4.85V) status is over 60ms