| DTC Strategy |
|
- Poor connector contact
- Faulty lubrication oil temperature sensor
|
| Enable Condition |
- Ignition switch voltage above 10 V
- Engine revs above 500 RPM
- Lubricating oil temperature -10 or less
- Greater than 2 km/h per second
- Lubrication temperature sensor acquisition elapsed time above 180 seconds
- Output speed above 300 RPM
- Axel pedal value above 1%
- Lever Position D or R
- Elapsed time above 150 seconds
|
| Threshold Value |
- The difference between the lubrication oil temperature and the captured lubrication oil temperature is below 2°C
|
| Diagnosis Time |
|
| MIL |
|