Repair Procedures: Inspection

1. Turn ignition switch "OFF" and connect the KDS to the Data Link Connector.
2. With the gear shift in P (Park) position and ignition switch "ON" (LED of the Power button illuminates in Red), select the "force drive" function.
3. Force drive the cooling fan motor.

Information 

There are two functions for the fan motor force drive: Low speed and high speed.

[Fan motor low speed] 

1. Start the "Fan motor low speed" of the force drive function.

   Courtesy of KIA MOTORS AMERICA, INC.

2. Force drive by pressing the start button.
3. Visually check the operation of the cooling fan.
4. Stop the force drive by pressing the stop button.

Courtesy of KIA MOTORS AMERICA, INC.

[Fan motor high speed] 

1. Start the "Fan motor high speed" of the force drive function.

   Courtesy of KIA MOTORS AMERICA, INC.

2. Force drive by pressing the start button.

   Courtesy of KIA MOTORS AMERICA, INC.

3. Visually check the operation of the cooling fan.
4. Stop the force drive by pressing the stop button.

Courtesy of KIA MOTORS AMERICA, INC.