DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Item	Detecting Condition	Possible Cause
DTC Strategy	CMP signal implausible (too long a segment time, etc.)	Poor connector connection Short in harness Electrical noise Target wheel damage CMPS - Ex (Bank1) ECM
Enable Conditions	Missing tooth in crankshaft detected no CKPS error (P033500/P033600)
Threshold Value	Counter of implausible CMP signal per camshaft revolution (i.e 2 crankshaft revolution) is greater than 4 times
Diagnostic Time	Continuously
MIL ON Condition	2 driving cycles