Tightening Torque
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS
| Item | N.m | kgf.m | lb.ft |
|---|---|---|---|
| Clutch engagement bearing | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 |
| TCM mounting bolt | 7.8 - 9.8 | 0.8 - 1.0 | 5.8 - 7.2 |
| Clutch actuator & TCM assembly mounting bolt | 19.6 - 26.5 | 2.0 - 2.7 | 14.5 - 19.5 |
| Fork cover mounting bolt | 3.9 - 5.9 | 0.4 - 0.6 | 2.9 - 4.3 |
| Gear actuator mounting bolt | 19.6 - 26.5 | 2.0 - 2.7 | 14.5 - 19.5 |
| Input shaft speed sensor mounting bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 |
| Inhibitor switch mounting bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 |
| Manual lever mounting nut | 17.4 - 24.5 | 1.8 - 2.5 | 13.0 - 18.1 |
| Oil drain plug | 44.1 - 58.8 | 4.5 - 6.0 | 32.5 - 43.4 |
| Oil filler plug | 58.8 - 78.5 | 6.0 - 8.0 | 43.4 - 57.9 |
| Shift cable bracket mounting bolt | 19.6 - 26.5 | 2.0 - 2.7 | 14.5 - 19.5 |
| Shift cable mounting nut | 9.8 - 13.7 | 1.0 - 1.4 | 7.2 - 10.1 |
| Shift cable retainer mounting nut | 9.8 - 14.7 | 1.0 - 1.5 | 7.2 - 10.8 |
| Shift lever assembly mounting bolt | 9.8 - 13.7 | 1.0 - 1.4 | 7.2 - 10.1 |
| Stater motor mounting bolt | 49.0 - 63.7 | 5.0 - 6.5 | 36.2 - 47.0 |
| Transmission support bracket mounting bolt | 98.1 - 117.7 | 10.0 - 12.0 | 72.3 - 86.8 |
| Transmission support bracket bolt | 58.9 - 78.5 | 6.0 - 8.0 | 43.4 - 57.8 |
| Transmission upper mounting bolt (Transmission=>Engine) | 42.2 - 53.9 | 4.3 - 5.5 | 31.1 - 39.8 |
| Transmission lower mounting bolt (Engine=>Transmission) | 42.2 - 48.1 | 4.3 - 4.9 | 31.1 - 35.4 |
| 42.2 - 53.9 | 4.3 - 5.5 | 31.1 - 39.8 |