Fuel tank leakage inspection

WARNING: This page is about a different variant/trim than selected.

Cracks or damages on fuel tank.
Good
- Fault might be intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and control module memory is not cleared yet. Thoroughly check terminal of battery, all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage. Repair or replace as necessary and then go to "Verification Of Repair " procedure.
No Good
- Repair as necessary and go to "Verification Of Repair " procedure.
- Re-do "Evap. Leakage Test" of "Vehicle S/W Management", and go to "Verification Of Repair " procedure.