LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Seltos S, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine And Transaxle Assembly (R & I) - 1.6L) >> Engine Cover >> Repair Procedures >> Removal And Installation

Removal And Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine cover (A).
    G13480264Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • Remove the engine cover.
    • Do not disengage both front and rear mounting point at the same time.
  2. Install in the reverse order of removal.