LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Seltos EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Double Clutch Transmission Diagnosis - 1.6L (1 Of 4)) >> DTC P074C-07: Gear Dropout Gear 4 >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2022 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Engine "OFF".
  2. Ignition "ON".
  3. Gear lever position "P".
  4. Brake status "ON".
  5. No DTC.
  1. Ignition "OFF".
  2. Connect KDS to "Data Link Connector (DLC)".
  3. Select the "Vehicle S/W Management" about related DTC with KDS.
  4. Perform "DCT Learning function" and go to "VERIFICATION OF REPAIR " procedure.
 Fig.1 to 7
CAUTION: In case of replacing TCM or DCT perform following procedures.
G13505084Courtesy of KIA MOTORS AMERICA, INC.
G13505085Courtesy of KIA MOTORS AMERICA, INC.
G13505086Courtesy of KIA MOTORS AMERICA, INC.
G13505087Courtesy of KIA MOTORS AMERICA, INC.
G13505088Courtesy of KIA MOTORS AMERICA, INC.
G13505089Courtesy of KIA MOTORS AMERICA, INC.
G13505090Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals