LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Seltos EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Double Clutch Transmission Diagnosis - 1.6L (1 Of 4)) >> DTC P074B-71: Unable To Engage (Select) Gear 3 >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2022 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Engine "OFF".
  2. Ignition "ON".
  3. Gear lever position "P".
  4. Brake status "ON".
  5. No DTC.
  1. Ignition "OFF".
  2. Connect KDS to "Data Link Connector (DLC)".
  3. Select the "Vehicle S/W Management" about related DTC with KDS.
  4. Perform "DCT Learning function" and go to "VERIFICATION OF REPAIR " procedure.
 Fig.1 to 7
CAUTION: In case of replacing TCM or DCT perform following procedures.
G13505045Courtesy of KIA MOTORS AMERICA, INC.
G13505046Courtesy of KIA MOTORS AMERICA, INC.
G13505047Courtesy of KIA MOTORS AMERICA, INC.
G13505048Courtesy of KIA MOTORS AMERICA, INC.
G13505049Courtesy of KIA MOTORS AMERICA, INC.
G13505050Courtesy of KIA MOTORS AMERICA, INC.
G13505051Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals