DTC Information: DTC Detecting Condition

If invalid wheel signal is received for more than 200 ms, EPB ECU sets DTC C164208.

Item	Detecting Condition	Possible Cause
DTC Strategy	CAN Message Monitoring	Poor connector connection Faulty CAN communication circuit Faulty HECU
Threshold Value	Invalid wheel signal (both FL and RR or both FR and RL or both FL and FR or both RL and RR) is received for more than 1.5s The fault is not checked for 2s after ignition "ON"
Fail Safe	KOA/Dynamic Braking (ESC) inhibited
Warning Lamp	Warning Lamp "ON"
Clear Condition	Ignition "OFF" and then "ON"