Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457703

Courtesy of KIA MOTORS AMERICA, INC.

G13457704

Courtesy of KIA MOTORS AMERICA, INC.

G13457705

Courtesy of KIA MOTORS AMERICA, INC.

G13457706

Courtesy of KIA MOTORS AMERICA, INC.

G13457707

Courtesy of KIA MOTORS AMERICA, INC.

G13457708

Courtesy of KIA MOTORS AMERICA, INC.

G13457709

Courtesy of KIA MOTORS AMERICA, INC.

G13457710

Courtesy of KIA MOTORS AMERICA, INC.

G13457711

Courtesy of KIA MOTORS AMERICA, INC.

G13457712

Courtesy of KIA MOTORS AMERICA, INC.

G13457713

Courtesy of KIA MOTORS AMERICA, INC.

G13457714

Courtesy of KIA MOTORS AMERICA, INC.