Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457655

Courtesy of KIA MOTORS AMERICA, INC.

G13457656

Courtesy of KIA MOTORS AMERICA, INC.

G13457657

Courtesy of KIA MOTORS AMERICA, INC.

G13457658

Courtesy of KIA MOTORS AMERICA, INC.

G13457659

Courtesy of KIA MOTORS AMERICA, INC.

G13457660

Courtesy of KIA MOTORS AMERICA, INC.

G13457661

Courtesy of KIA MOTORS AMERICA, INC.

G13457662

Courtesy of KIA MOTORS AMERICA, INC.

G13457663

Courtesy of KIA MOTORS AMERICA, INC.

G13457664

Courtesy of KIA MOTORS AMERICA, INC.

G13457665

Courtesy of KIA MOTORS AMERICA, INC.

G13457666

Courtesy of KIA MOTORS AMERICA, INC.