Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457581

Courtesy of KIA MOTORS AMERICA, INC.

G13457582

Courtesy of KIA MOTORS AMERICA, INC.

G13457583

Courtesy of KIA MOTORS AMERICA, INC.

G13457584

Courtesy of KIA MOTORS AMERICA, INC.

G13457585

Courtesy of KIA MOTORS AMERICA, INC.

G13457586

Courtesy of KIA MOTORS AMERICA, INC.

G13457587

Courtesy of KIA MOTORS AMERICA, INC.

G13457588

Courtesy of KIA MOTORS AMERICA, INC.

G13457589

Courtesy of KIA MOTORS AMERICA, INC.

G13457590

Courtesy of KIA MOTORS AMERICA, INC.

G13457591

Courtesy of KIA MOTORS AMERICA, INC.

G13457592

Courtesy of KIA MOTORS AMERICA, INC.