Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457559

Courtesy of KIA MOTORS AMERICA, INC.

G13457560

Courtesy of KIA MOTORS AMERICA, INC.

G13457561

Courtesy of KIA MOTORS AMERICA, INC.

G13457562

Courtesy of KIA MOTORS AMERICA, INC.

G13457563

Courtesy of KIA MOTORS AMERICA, INC.

G13457564

Courtesy of KIA MOTORS AMERICA, INC.

G13457565

Courtesy of KIA MOTORS AMERICA, INC.

G13457566

Courtesy of KIA MOTORS AMERICA, INC.

G13457567

Courtesy of KIA MOTORS AMERICA, INC.

G13457568

Courtesy of KIA MOTORS AMERICA, INC.

G13457569

Courtesy of KIA MOTORS AMERICA, INC.

G13457570

Courtesy of KIA MOTORS AMERICA, INC.