Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457525

Courtesy of KIA MOTORS AMERICA, INC.

G13457526

Courtesy of KIA MOTORS AMERICA, INC.

G13457527

Courtesy of KIA MOTORS AMERICA, INC.

G13457528

Courtesy of KIA MOTORS AMERICA, INC.

G13457529

Courtesy of KIA MOTORS AMERICA, INC.

G13457530

Courtesy of KIA MOTORS AMERICA, INC.

G13457531

Courtesy of KIA MOTORS AMERICA, INC.

G13457532

Courtesy of KIA MOTORS AMERICA, INC.

G13457533

Courtesy of KIA MOTORS AMERICA, INC.

G13457534

Courtesy of KIA MOTORS AMERICA, INC.

G13457535

Courtesy of KIA MOTORS AMERICA, INC.

G13457536

Courtesy of KIA MOTORS AMERICA, INC.