Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457493

Courtesy of KIA MOTORS AMERICA, INC.

G13457494

Courtesy of KIA MOTORS AMERICA, INC.

G13457495

Courtesy of KIA MOTORS AMERICA, INC.

G13457496

Courtesy of KIA MOTORS AMERICA, INC.

G13457497

Courtesy of KIA MOTORS AMERICA, INC.

G13457498

Courtesy of KIA MOTORS AMERICA, INC.

G13457499

Courtesy of KIA MOTORS AMERICA, INC.

G13457500

Courtesy of KIA MOTORS AMERICA, INC.

G13457501

Courtesy of KIA MOTORS AMERICA, INC.

G13457502

Courtesy of KIA MOTORS AMERICA, INC.

G13457503

Courtesy of KIA MOTORS AMERICA, INC.

G13457504

Courtesy of KIA MOTORS AMERICA, INC.